Conquer Nature By Cooperating With It

Ocean Trace logo 
Sea Minerals 
for Animal Drinking Water

  You can provide your animals with exceptional drinking water by 
using the AG-USA water treatment program:

1.      Filter the water, if needed.

2.      Add Ocean Trace to the water.

3.     Pass the water through a NAT Water Structuring Machine.


Previously, Ocean Trace was listed for organic use for animal drinking water.
However, there was not enough demand to maintain this listing.
But you can be assured that this product is organic in nature.



Many Americans have realized that good drinking water plays an important role in maintaining good health.  We buy bottled water, or filter our water to get rid of Chlorine and other unwanted chemicals. 

But have we ever thought that poor water quality may be adversely affecting our animals? 

AG-USA? would like to help you to improve the quality of the water you give to your animals.  We are currently using our cutting edge technology to improve water for humans, and now it is available for livestock.

Our program is simple, yet effective.  Here is what we recommend: 

First, for those rare cases where it is needed, filter the water.

If the water needs filtered, the filter should be placed before injecting the Ocean Trace.

Second, inject Ocean Trace into the water, or add it manually. 

Please contact us if you need to purchase an injector (medicator).  We can help you find a unit that is right for you. 


We take 100 gallons of ocean water and evaporate it down to one gallon.  In the evaporation process, most of the Sodium Chloride solidifies and is removed, leaving behind a dense sea mineral solution. 


The ocean contains all 76 minerals found in nature.  We inject a small amount of these sea minerals into animal drinking water (i.e., 1 part Ocean Trace to 2,000 to 4,000 parts water).  This broad spectrum of minerals facilitates the NAT Water Structuring Machine in doing its job of structuring the water and increasing the number of Biophotons.


Inject 1 part Ocean Trace into 3,000 parts water. 

Ocean Trace may also be added to water manually.  Just calculate the combined weight of the animals drinking from the water, then divide it by one of the 3 weight categories below to get actual number of ounces, tsp., or cc needed. 

0.8 ounces (12 cc) daily for every 1,000 lbs. of combined animal weight.
2 tsp. daily for every 400 lbs. of combined animal weight.
2 cc daily for every 80 lbs. of combined animal weight.

If you choose this method, make sure to maintain a minimum of 1,000 parts water to 1 part of Ocean Trace.


How much Ocean Trace is used for a 32,000 bird chicken house where they drink approximately 45,000 gallons of water in a 40 day grow-out?  At 1 part of GroPal to 3,000 parts water, it will take 15 gallons of Ocean Trace per grow-out.

At 1 to 3,000, you are adding approximately 3/8 oz. (12 cc) of Ocean Trace per 1,000 lbs. of bird per day.

This same amount of Ocean Trace may be used for any type of fowl (chickens, geese, ducks, turkeys, etc.) 

Third, run the water through a Water Structuring Machine.

A NAT Water Structuring Machine induces a Unified Field of energy in the water molecules, drawing in Biophotons. 

The Water Structuring Device unit highly structures the water.  The level of structure of the water is directly proportional to the number of Biophotons into the water.  Take a few minutes to see the NAT units that are available by clicking here.

Purchase Ocean Trace